MonoDAQ-E-ASI-2-T is a device with two analog sensor interface channels and one tacho channel. It converts the signal from MonoDAQ-SNS-ACC-1-10k-F sensors and sends the data over EtherCAT bus to the master PC. Up to two ACC-SNS sensors with M8 connectors can be connected. Maximum sample rate is 40 kS/s per channel. Only a single cable is needed to daisy chain multiple E-ASI-2-T devices with up to 50 m device-device distance. MonoDAQ-SNS-ACC-1-10k-F is a vibration and temperature measurement probe. Key features: • 40 kS/s max. sample rate per sensor, two sensors per device • EtherCAT bus, daisy-chaining with single cable up to 50 m device-to-device • Software included
MonoDAQ-E-ASI-2-T is a device with two analog sensor interface channels and one tacho channel. It converts the signal from MonoDAQ-SNS-ACC-1-10k-F sensors and sends the data over EtherCAT bus to the master PC. Up to two ACC-SNS sensors with M8 connectors can be connected. Maximum sample rate is 40 kS/s per channel. Only a single cable is needed to daisy chain multiple E-ASI-2-T devices with up to 50 m device-device distance.
MonoDAQ-SNS-ACC-1-10k-F is a vibration and temperature measurement probe. Packaged in a small aluminium housing it consists of three sensors: a) single axis accelerometer with 0-10 kHz bandwidth and analog voltage output, b) temperature sensors with I2C interface and c) low-speed triaxial accelerometer with I2C interface. The probe is rated with IP67 ingress protection and -20 to 85 degC temperature range.
Key features: